-Bacterial
-Virucidal*
-Fungicidal
-Tuberculocidal**
Ready to use
For Professional Use Only
DESCRIPTION
Envirocide is a multi-purpose disinfectant/decontaminant cleaner for use on hard, non-porous, inanimate surfaces.
It is useful in hospital operating rooms, dental operatories, emergency departments, isolation areas, neonatal units, and other critical care areas where environmental control of cross contamination between treated surfaces is important.
Envirocide will effectively clean and disinfect, when used as directed, such items as: interior and exterior surfaces of infant incubators and bassinets, exterior surfaces of anesthesia machines and respiratory therapy equipment surfaces, operating room tables and lights, exterior surfaces of dental operatories, which are made of plastic (such as: polycarbonate, polyvinylchloride, polypropylene and polystyrene), and use sites listed on this label consisting of non-porous vinyl, stainless steel, painted surfaces, Plexiglas® and glass.
Active Ingredients:
Diisobutylphenoxyethoxyethyl dimethyl benzyl ammonium chloride 0.28%
Isopropanol 17.20 %
Inert Ingredients: 82.52%
Total 100.00%
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
FOR PRECLEANING NON-INSTRUMENT SURFACES PRIOR TO DISINFECTION:
Remove gross filth and heavy soil loads. Spray Envirocide directly onto surface. Allow to remain visible wet for 30 seconds. Wipe surface using a towel.
FOR PRECLEANING INSTRUMENTS PRIOR TO DISINFECTION:
Remove gross filth and heavy soil loads.
For use as a precleaning decontaminant spray:
Place instruments in a container. Spray Envirocide so as to thoroughly drench all instrument surfaces and allow to remain visibly wet for 30 seconds. Remove and rinse instruments. Follow with appropriate cleaning and disinfection process.
FOR DISINFECTING NON-INSTRUMENT SURFACES, INCLUDING HIV-1 AND HBV APPLICATIONS:
Spray Envirocide directly onto precleaned surface, thoroughly wetting area to be disinfected. Allow surface to remain visibly wet for 3 minutes at room temperature (69°F/20°C). **For Tuberculocidal activity surface must remain visibly wet for a full 5 minutes at room temperature. Wipe surface using a towel or allow to air dry.
FOR DISINFECTING PRECLEANED NON-CRITICAL MEDICAL DEVICES, INTSTRUMENTS AND IMPLEMENTS, INCLUDING HIV-1 AND HBV APPLICATIONS:
Instruments must be thoroughly cleaned to remove excess organic debris, rinsed and dried. Thoroughly clean and rinse lumens of hollow instruments. Using either a soaking tray or an ultrasonic unit, immerse instruments in Envirocide for 3 minutes at room temperature (69°F/20°C). **For Tuberculocidal activity instruments must remain visibly wet for a full 5 minutes at room temperature. Remove and rinse instruments. Wipe dry prior to use. Discard solution after each use.
Non-critical medical devices are items that come in contact only with intact skin.
Note: Critical and semi-critical devices must be followed by appropriate terminal sterilization/high-level
KEEP OUT OF REACH OF CHILDREN
CAUTION:
Hazardous to Humans and Animals
Harmful if absorbed through skin. Causes moderate eye irritation. Avoid contact with eyes, skin, or clothing. Wash hands before eating, drinking, chewing gum, using tobacco, or using the toilet. Remove contaminated clothing and wash clothing before reuse. See side panel for additional precautionary statements.
Physical or Chemical Hazards: Combustible. Do not use or store near heat or open flame.
This product is not to be used as a terminal sterilant/high-level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body. This product may be used to preclean or decontaminate critical or semi-critical medical devices prior to sterilization/high-level disinfection.
ENVIROCIDE EFFECTIVELY KILLS HIV AND HBV ON PRECLEANED ENVIRONMENTAL SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS IN HEALTHCARE SETTINGS OR OTHER SETTINGS IN WHICH THERE IS AN EXPECTED LIKELIHOOD OF SOILING OF INANIMATE SURFACES/OBJECTS WITH BLOOD/BODY FLUIDS, AND IN WHICH THE SURFACES/OBJECTS CAN BE ASSOCIATED WITH THE POTENTIAL FOR THE TRANSMISSION OF HUMAN IMMUNODEFICIENCY VIRUS TYPE 1 (HIV-1) AND HEPATITIS B VIRUS (HBV).
SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1 (HUMAN IMMUNODEFICIENCY VIRUS) AND HBV OF SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUID:
Personal protection: Wear appropriate barrier protection such as protective gloves, gowns, masks or eye coverings.
Cleaning procedure: Blood and other bodily fluids must be thoroughly cleaned from surfaces and objects before disinfection with Envirocide.
Contact Time: A contact time of 3 minutes is required for HIV-1 a
